There are so many plumbing fixtures out there that sometimes it can get slightly overwhelming when the term used is unfamiliar or believed to only refer to faucets. However, when it comes to maintaining everything properly, it’s important to remember there are a lot more plumbing fixtures that need care and attention. First of all, let’s establish what plumbing fixtures are.Simply put they are devices that together, along with a plumbing system, interact with water.
What Plumbing Fixtures Should I Know About?
The common fixtures included are baths, shower heads, taps and toilets. Everything you find in a bathroom and a kitchen that is linked to water. It also includes the more interesting, luxurious items such as hot tubs.
What Do Plumbing Fixtures Do
All plumbing fixtures are designed to distribute water. Whether that is to drain it or deliver the water; each different plumbing fixture is tailored for a specific job. Something like a hot tub is designed to indulge your body by bathing in hot water, effectively a larger, more expensive bath with jets.
The feature design is made to fill with water and also be able to spurt out water at the same time to create those small fountains of vertical massaging water. In contrast to that a toilets’ feature design is produced for the sole purpose of flushing away water and any contents ( no need to explaining further). Whilst these both include plumbing fixtures. Both do completely different jobs.
How To Maintain Your Plumbing Fixtures
When it comes to maintaining your plumbing fixtures there is one simple rule to remember…clean, clean, clean. Make sure to keep up hygiene. By regularly scrubbing away any bacteria that could cause mould to grow or rusting to occur. It may be a boring task to clean these areas that aren’t always easily accessible. However, it is a necessary evil and one that will really pay off in the long run. Another bonus, it has the potentially save you some money too.
Top Tips For Cleaning Your Plumbing Fixtures
How To Clean A Shower Head
Getting rid of the limescale that is clogging your shower head is a simple fix. to fill up a small bag with white vinegar, attach it with a rubber band to the head and let it soak for an hour. When you return simply remove the bag of vinegar and rinse then wipe away the remaining vinegar.
The limescale from the shower head will move away easily. First, fill up a small bag with white vinegar. Attach it to the shower head with a rubber band. Allow the head to sit in the vinegar and soak for an hour or so. When you return simply remove the bag of vinegar and rinse then wipe away the remaining vinegar. The limescale from the shower head will move away easily.
Secondly, attach it to the shower head with a rubber band. Allow the head to sit in the vinegar and soak for an hour or so. When you return simply remove the bag of vinegar and rinse then wipe away the remaining vinegar. The limescale from the shower head will move away easily. Finally, when you return to the shower head, remove the bag of vinegar. All that is left to do is rinse and wipe away the remaining vinegar. Now the limescale that was once an ugly problem, will wipe away easily and with no hassle.
How To Clean Out Your Drains
Here’s another simple but very effective cleaning tip for drains. Once a month. pour a bit of baking soda and warm water down your drains to dissolve anything that could be there causing your drains to be clogged. Again, it’s cheap and takes no time to carry out but is very effective. Once a month, pour a bit of baking soda and warm water down the drains. This will dissolve anything that could be hiding there causing your drains to become clogged. Again, this is a simple and cheap solution that takes no time to carry out but is very effective.
How To Stop Dripping Taps
A common problem, that can be extremely irritating. The simplest way to stop this issue is to prevent wear and tear. How? Often people tighten their taps far more than needed. A great tip is not to fasten your taps only as much as they need and not more. Often people tighten their taps far more than needed. A great tip is not to fasten your taps anymore than they need to be tightened. This may sound like an obvious thing.
People have a tendency to over tighten when the turn the water off. This can often be overkill causing wear and tear. Turn the tap as much as needed, until the water stops completely but no more. The taps don’t need to be locked down like fort Knox. By being less aggressive with the tightness you prevent wearing down the fixtures. Ultimately, this will prevent any water leak detection in Kent or those annoying drips. For tips on keeping faucets cleaned check out this piece.
What If There Is A Problem With My Plumbing Fixture That I Can’t Fix
Maintaining your plumbing fixtures enables you to enjoy those relaxing hot baths at the end of the day. Simple little fixes like the tips above allow you to pour a refreshing cool glass of water with a simple twist of a tap.
Plumbing fixtures are essential to your home. Maintaining them is part and parcel of that. Every now and again there are unfortunate events and something gets blocked or starts leaking. Even if you have looked after things properly you can’t always avoid something going wrong. In the event that you do have a problem that you can’t fix or don’t have time to deal with on your own, you can call our twenty four hour emergency plumbing services in Kent.